delphimvcframework/unittests/general/Several/bin/firebird/firebird.conf

#########################################
#
# Firebird version 3.0 configuration file
#
# Comments
# --------
# The # character is used for comments and can be placed anywhere on a
# line.  Anything following the # character on a line is considered a
# comment.
#
# Examples:
#
#    # This is a comment
#    DefaultDbCachePages = 2048   # This is an end-of-line comment
#
# Entries
# -------
# The default value for each entry is listed to the right of the "=".
# To activate an entry, remove the leading "#"s and supply the desired
# value.
#
# Please note, by default a number of the values are specified in **Bytes** (Not KB).
# You may add obvious abbreviations k, m and g in the end of a number to specify
# kilobytes, megabytes and gigabytes.
#
# There are three types of configuration values: integer, boolean and string.
#
# Integer
# -------
# Integers is what they sound like, an integral value. Examples:
#   1
#   42
#   4711
#   24M		# 24 * 1024 * 1024
#
# Boolean
# -------
# Boolean is expressed as integer values with 0 (zero) being "false" and
# non-zero is taken to mean "true". For consistency we recommend you
# only use 0/1. Also strings 'y', 'yes' and 'true' stand for "true".
#
# String
# ------
# Strings are also what they sound like, strings. Examples:
#   RemoteServiceName = gds_db
#   RemotePipeName = pipe47
#
# Scopes
# ------
# Some parameters are marked as per-database / per-connection configurable.
# Per-database configuration is done in file databases.conf (former aliases.conf).
# Per-connection configuration is primarily client tool and done using
# isc_dpb_config parameter in DPB (isc_spb_config for services).
# Configuration data, added to parameters block, has same format as this file.
# Pay attention that since firebird3 there is no hard limit of 255 bytes per entry
# provided you are using isc_dpb_version2 format of DPB. The simplest way to create
# DPB/SPB is to use IXpbBuilder - when needed you will have >255 bytes entries in
# parameters block. Notice that per-database entries also may be tuned using DPB
# in case of embedded engine when attaching to database first time.
#
# Macro substitution
# ------------------
# There is a number of predefined macro commands, that can be used in config
# files where directory name is needed. They are available using $(name) syntax.
# The complete list of them as follows:
#	root - root directory of firebird instance
#	install - directory where firebird is installed
#	this - directory where current configuration file is located
#	dir_conf - directory where firebird.conf and databases.conf are located
#	dir_secDb - directory where default security database is located
#	dir_plugins - directory where plugins are located
#	dir_udf - directory where UDFs are located by default
#	dir_sample - directory where samples are located
#	dir_sampleDb - directory where sample DB (employee.fdb) is located
#	dir_intl - directory where international modules are located
#	dir_msg - directory where messages file (firebird.msg) is located
# Like the rest of config internals macros are case-insensitive.
# Capital letters here are used only for better human readability.
#
#
# Includes
# --------
# One can include one config file into another one.
# When relative path is used, it's treated relative to current config file.
# I.e. when
#	include some_file.conf
# is used in /opt/config/master.conf, we include /opt/config/some_file.conf.
# Traditional wildcards * and ? may be used in include operator. In this case
# all matching files will be included in undefined order. Example:
#	include $(dir_plugins)/config/*.conf
#
# Portions of this file have been reproduced/made available with the
# permission of Ann Harrison @ IBPhoenix.
#
#########################################


# ----------------------------
# Database Paths/Directories
#
# DatabaseAccess may be None, Full or Restrict. If you choose Restrict,
# provide ';'-separated trees list, where database files are stored.
# Relative paths are treated relative to the root directory of firebird.
# Default value 'Full' gives full access to all files on your site.
# To specify access to specific trees, enum all required paths 
# (for Windows this may be something like 'C:\DataBase;D:\Mirror',
# for unix - '/db;/mnt/mirrordb'). If you choose 'None', then only
# databases listed in databases.conf can be attached.
#
# Note: simple quotation marks shown above should *NOT* be used when
# specifying values and directory path names. Examples:
#
# DatabaseAccess = None
# DatabaseAccess = Restrict C:\DataBase
# DatabaseAccess = Restrict C:\DataBase;D:\Mirror
# DatabaseAccess = Restrict /db
# DatabaseAccess = Restrict /db;/mnt/mirrordb
# DatabaseAccess = Full
#
# UNCONTROLLED DATABASE ACCESS MAY COMPROMISE YOUR SYSTEM!
# IT IS STRONGLY RECOMMENDED THAT THIS SETTING BE USED TO LIMIT
# DATABASE LOCATIONS!
#
# Type: string (special format)
#
#DatabaseAccess = Full


# ----------------------------
# Ability to access databases remotely
#
# RemoteAccess may be true or false (1/0, Yes/No) - it's boolean value.
# By default RemoteAccess to all databases except security DB is enabled.
# If you plan to use more than one dedicated security database it's
# recommended to disable remote access to them in databases.conf.
# However (as an additional method to have secure enhanced firebird
# installation) one can disable remote access globally and re-enable
# in databases.conf only for specific databases.
#
# Per-database configurable.
#
# Type: boolean
#
#RemoteAccess = true


# ----------------------------
# External File Paths/Directories
#
# ExternalFileAccess may be None, Full or Restrict. If you choose
# Restrict, provide ';'-separated trees list, where external files
# are stored. Relative paths are treated relative to the root directory 
# of firebird. Default value 'None' disables any use of external files
# on your site. To specify access to specific trees, enum all required
# paths (for Windows this may be something like 'C:\ExternalTables',
# for unix - '/db/extern;/mnt/extern').
#
# Per-database configurable.
#
# NOTE: THE EXTERNAL TABLE ENGINE FEATURE COULD BE USED TO COMPROMISE
# THE SERVER/HOST AS WELL AS DATABASE SECURITY!!
#
# IT IS STRONGLY RECOMMENDED THAT THIS SETTING BE USED TO LIMIT
# EXTERNAL TABLE LOCATIONS!
#
# Type: string (special format)
#
#ExternalFileAccess = None


# ----------------------------
# External Function (UDF) Paths/Directories
#
# UdfAccess may be None, Full or Restrict. If you choose
# Restrict, provide ';'-separated trees list, where UDF libraries
# are stored. Relative paths are treated relative to the root directory 
# of firebird.
#
# Default value 'Restrict UDF' provides the same restrictions
# as in FB 1.0. To specify access to specific trees, enum all required
# paths (for Windows this may be something like 'C:\ExternalFunctions',
# for unix - '/db/extern;/mnt/extern').
#
# NOTE: THE EXTERNAL FUNCTION ENGINE FEATURE COULD BE USED TO COMPROMISE
# THE SERVER/HOST AS WELL AS DATABASE SECURITY!!
#
# IT IS STRONGLY RECOMMENDED THAT THIS SETTING BE USED TO LIMIT
# EXTERNAL FUNCTION LOCATIONS!
#
# Type: string (special format)
#
#UdfAccess = Restrict UDF


# ----------------------------
# Temporary directories
#
# Provide ';'-separated trees list, where temporary files are stored.
# Relative paths are treated relative to the root directory of firebird.
# Default value is determined using FIREBIRD_TMP, TEMP or TMP 
# environment options. Once the first specified directory has no 
# available space, the engine will switch to the next one, and so on.
#
# E.g.:
# TempDirectories = c:\temp
# or
# TempDirectories = c:\temp;d:\temp
#
# Type: string (special format)
#
#TempDirectories =


# ----------------------------
# Trace configuration file for system audit
#
# Empty value means that system audit is turned off.
#
# Type: string
#
#AuditTraceConfigFile =

# ----------------------------
# Maximum summary size of each user trace session's log files in MB.
# When log files size reach this limit, trace session automatically 
# suspends until interactive user service read and delete some log files.
#
# Type: integer
#
#MaxUserTraceLogSize = 10


# ----------------------------
# Number of cached database pages
#
# This sets the number of pages from any one database that can be held
# in cache at once. If you increase this value, the engine will
# allocate more pages to the cache for every database. By default, the
# SuperServer allocates 2048 pages for each database and the classic
# allocates 256 pages per client connection per database.
#
# Per-database configurable.
#
# Type: integer
#
#DefaultDbCachePages = 2048

# ----------------------------
# Disk space preallocation
#
# Sets the amount of preallocated disk space in bytes. Disk space
# preallocation allows to reduce physical file fragmentation and to make 
# database work in out of disk space condition. With preallocation enabled,
# engine allocates 1/16nth of already allocated disk space at a time but 
# not less than 128KB and no more than DatabaseGrowthIncrement (128MB by 
# default). To disable preallocation set DatabaseGrowthIncrement to zero.
# Shadow database files are not preallocated.
#
# Per-database configurable.
#
# Type: integer
#
#DatabaseGrowthIncrement = 128M

# ----------------------------
# File system cache threshold
#
# The threshold value that determines whether Firebird will use file system
# cache or not. File system caching is used if database cache size in pages 
# (configured explicitly in database header or via DefaultDbCachePages setting)
# is less than FileSystemCacheThreshold value.
#
# To use file system cache always set FileSystemCacheThreshold to a large value.
# To bypass file system cache for all databases set FileSystemCacheThreshold to 
# zero.
# 
# Type: integer, measured in database pages
#
# Per-database configurable.
#
#FileSystemCacheThreshold = 64K

# ----------------------------
# File system cache size
#
# This setting controls the maximum amount of RAM used by Windows file system
# cache on 64-bit Windows XP, Windows Server 2003 SP1 or later host. It has no
# effect for Unix hosts in this release yet.
#
# Note that the lowest number presently supported is 10%, and the highest number
# is 95%; numbers outside these limits will be set to the default of 30%.
#
# If the cache size has already been selected when the engine starts the host
# setting will not be changed. Thus you may need to reboot the host for the
# change of this setting to have effect.
#
# To leave host caching settings unchanged set this parameter to 0. This is
# the default parameter value.
#
# Security note
# To adjust the setting engine needs SeIncreaseQuotaPrivilege right. Built-in
# service accounts and administrators have it by default. Installer grants this
# right to Firebird service account. If the engine fails to adjust the cache 
# size setting it will log warning message to the firebird.log and continue.
#
# Type: integer, measured in % of total physical RAM
#
#FileSystemCacheSize = 0

# ----------------------------
# Remove protection against opening databases on NFS mounted volumes on
# Linux/Unix and SMB/CIFS volumes on Windows.
#
# This also permits creating database shadows on mounted network volumes.
#
#     ***WARNING*** ***WARNING*** ***WARNING*** ***WARNING***
#
# This option removes an important safety feature of Firebird and can
# cause irrecoverable database corruption. Do not use this option unless
# you understand the risks and are prepared to accept the loss of the
# contents of your database.
# Unless this configuration option is changed from 0 to 1, Firebird can
# open a database only if the database is stored on a drive physically
# attached to the local computer - the computer running that copy of
# Firebird. Requests for connections to databases stored on NFS mounted
# drives are redirected to a Firebird server running on the computer that
# "owns" the disk.
# This restriction prevents two different copies of Firebird from opening
# the same database without coordinating their activities. Uncoordinated
# access by multiple copies of Firebird will corrupt a database. On a local
# system, the system-level file locking prevents uncoordinated access to
# the database file.
#
# NFS does not provide a reliable way to detect multiple users of a file on
# an NFS mounted disk. If a second copy of Firebird connects to a database on
# an NFS mounted disk, it will corrupt the database.
# Under some circumstances, running a Firebird server on the computer that
# owns NFS mounted volumes is inconvenient or impossible. Applications that
# use the "embedded" variant of Firebird and never share access to a database
# can use this option to permit direct access to databases on NFS mounted
# volumes.
#
# The situation for SMB/CIFS is quite similar to NFS with not all configurations
# providing file locking mechanisms needed for safe operation. Using SuperServer
# engine with the database on NT file server may be considered relatively safe 
# as file locking protects the database from being used by the several engines.
# Network stack can still change order of writes so you may get a corrupted
# database in case of network errors or power outage.
#
# The useful and safe case is working with a shared database marked read-only.
#
# DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING.
#
# Type: boolean
#
#RemoteFileOpenAbility = 0

# ----------------------------
# Temporary space management
#
# Temporary storage is used by the sorting module, it's also
# intended to store temporary datasets etc.
#
# The parameters below handle the allocation and caching policy
# for the temporary space manager. In previous Firebird versions,
# they were prefixed with "SortMem" instead of current "Temp".
#
# The smallest block size being allocated in the temporary storage.
# This value reflects the allocation granularity.
#
# Type: integer
#
#TempBlockSize = 1M

#
# The maximum amount of the temporary space that can be cached
# in memory.
#
# For Classic servers, this setting is defaulted to 8 MB.
# Although it can be increased, the value applies to each client
# connection/server instance and thus consumes a lot of memory.
#
# Type: integer
#
#TempCacheLimit = 64M


# ----------------------------
#
# This group of parameters determines what plugins will be used by firebird.
# Format of string is the list of plugins, separated by space, ',' or ';'.
# Plugins will be tried in an order, specified here.
# In many cases correct order is important!
#
# Type: string

# AuthServer and AuthClient determine which authentication methods will be used
# by network server and client redirector. The Secure remote password plugin
# using SHA-1 for the client proof is the default for both client and server.
# Additionally, the default client configuration (AuthClient) also supports new Srp256
# plugin using SHA-2 for the client proof. This enables backwards compatibility
# with older Firebird 3 servers & clients but in order to meet NIST requirements
# Srp256 should be used. To enforce NIST requirements on your server set
# AuthServer=Srp256. Be aware that this breaks compatibility with older
# than 3.0.4 clients.
#
# The default client configuration (AuthClient) also supports the pre-Firebird 3 legacy 
# authentication protocol (Legacy_Auth). This is again for backwards 
# compatibility but has many known weaknesses and is deprecated for current use.
#
# The default Windows client configuration (AuthClient) also includes support for
# the Win_Sspi plugin. This implements windows trusted authentication and is backward
# compatible with 2.1 and 2.5 clients and servers running on windows.
#
# Per-database configurable.
#
#AuthServer = Srp
#
# Per-connection and per-database configurable.
#
#AuthClient = Srp, Srp256, Legacy_Auth           #Non Windows clients
#AuthClient = Srp, Srp256, Win_Sspi, Legacy_Auth #Windows clients
#
# If you need to use server plugins that do not provide encryption key (both Legacy_Auth
# & Win_Sspi) you should also turn off required encryption on the wire with WireCrypt
# configuration parameter except when working with the XNET protocol which is never encrypted.
#

# UserManager sets plugin used to work with security database. If more than
# one plugin is given, first plugin from the list is used by default. If you 
# need to manage legacy logins using legacy tools set it to Legacy_UserManager.
# Other managers may be chosen in create/alter/drop user commands.
#
# Per-database configurable.
#
#UserManager = Srp

# TracePlugin is used by firebird trace facility to send trace data to the user
# or log file in audit case.
#
#TracePlugin = fbtrace

# Wire crypt plugins are used to crypt data transferred over the wire.
# In default case wire is encrypted using Alleged RC4
# (key must be generated by auth plugin).
#
# Per-connection configurable.
#
#WireCryptPlugin = Arc4

# Key holder is a kind of temp storage for DB crypt keys.
# There is no default for this kind of plugins.
#
#KeyHolderPlugin =

# ----------------------------
#
# Ability to use encrypted security database
#
# If one relies on network encryption feature with crypt key generated
# by authentication plugin (like SRP does) to transfer database crypt
# keys over the wire then use of encrypted security databases is a kind of
# vicious circle. In order to send DB crypt key over the wire in secure way
# wire transfers should be already encrypted but this requires wire crypt key
# from authentication plugin which needs to open security database for hash
# validation which in turn requires DB crypt key. Luckily in most cases there
# is no big need to encrypt security database - it protects itself quite well
# if you use high quality passwords. But in some cases it's desired to have
# security database encrypted, for example if one wants to use self security
# database feature for encrypted database. In that case special care should be
# taken to encrypt that key before passing it to server using callback. Make
# sure your keys are well encrypted before enabling this parameter. Take into
# account that with AllowEncryptedSecurityDatabase=TRUE unencrypted by firebird
# protocol key transfer may take place even with not encrypted security database.
# This feature is not supported by legacy authentication plugin - if you care
# about security please never use legacy authentication.
#
# Type: boolean
#
# Per-database configurable.
#
#########################################################################
# Please understand what are you doing before enabling this feature !!! #
#########################################################################
#
#AllowEncryptedSecurityDatabase = false

# ----------------------------
#
# This parameter determines what providers will be used by firebird.
# Format is the same as for the list of plugins (see a few lines before).
# This is not strange because internally provider is just a kind of plugin.
#
# Type: string
#
# Per-database & per-connection configurable.
#
#Providers = Remote,Engine12,Loopback


# ----------------------------
#
# Determines the number of seconds that the lock manager will wait after a
# conflict has been encountered before purging locks from dead processes
# and doing extra deadlock scan cycle. Engine detects deadlocks instantly
# in all normal cases, so this value affects things only if something goes
# wrong. Setting it too low may degrade system performance.
#
# Per-database configurable.
#
# Type: integer
#
#DeadlockTimeout = 10


# ----------------------------
#
# How often the pages are flushed on disk
# (for databases with ForcedWrites=Off only)
#
# Number of unflushed writes which will accumulate before they are
# flushed, at the next transaction commit.  For non-Windows ports,
# the default value is -1 (Disabled)
#
# Per-database configurable.
#
# Type: integer
#
#MaxUnflushedWrites = 100

#
# Number of seconds during which unflushed writes will accumulate
# before they are flushed, at the next transaction commit. For non-Windows
# ports, the default value is -1 (Disabled)
#
# Per-database configurable.
#
# Type: integer
#
#MaxUnflushedWriteTime = 5


# ----------------------------
#
# This option controls whether to call abort() when internal error or BUGCHECK
# is encountered thus invoke post-mortem debugger which can dump core suitable
# for off-line analysis. When disabled engine tries to minimize damage and
# continue execution.
#
# Note that setting this option to 1 makes engine produce traceable coredumps
# when something nasty like SIGSEGV happens inside UDF. On Windows enabling
# this option makes engine invoke JIT debugger facilities when errors happen.
#
# For debugging builds (DEV_BUILD), default value is 1 (Enabled)
#
# Type: boolean
#
#BugcheckAbort = 0


# ----------------------------
# How COMMIT\ROLLBACK RETAINING handle GLOBAL TEMPORARY TABLE ON COMMIT DELETE ROWS 
#
# GLOBAL TEMPORARY TABLE ON COMMIT DELETE ROWS (GTT) data is cleared on "hard"
# commit (rollback) but should be preserved on commit(rollback) retaining. 
# Due to bug in initial implementation in Firebird 2.1 that data is not visible
# for the application. This setting allows to preserve backward compatibility 
# (i.e. clear GTT data on commit\rollback retaining).
# Value of 0 makes engine to not clear GTT data on commit\rollback retaining and
# let application to see it.
# Default value is 1 (clear GTT data on commit\rollback retaining).
# Note: in Firebird 4 default value will be changed to 0 and this setting will
# be removed at Firebird 5.
#
# Per-database configurable.
#
# Type: boolean
#
#ClearGTTAtRetaining = 1


# ----------------------------
# Relaxing relation alias checking rules in SQL
#
# Since Firebird 2.0, strict alias checking rules were implemented in the SQL
# parser to accord with the SQL standard requirements. This setting allows
# these rules to be relaxed in order to allow legacy applications to run on 
# Firebird 2.0.
# A setting of 1 (true) allows the parser to resolve a qualified column reference 
# using the relation name, where an alias has been specified for that relation.
#
# For example, it allows a query such as:
#       SELECT TABLE.X FROM TABLE A
#
# It is not recommended to enable this setting. It should be regarded as an 
# interim workaround for porting untidy legacy code, until it is practicable to 
# revise such code. 
# 
# CAUTION!
# There is no guarantee that this setting will be available in future Firebird 
# versions.
#
# Type: boolean
#
#RelaxedAliasChecking = 0


# ----------------------------
# Client Connection Settings (Basic)
#
# Seconds to wait before concluding an attempt to connect has failed.
#
# Per-connection configurable.
#
# Type: integer
#
#ConnectionTimeout = 180

#
# Should connection over the wire be encrypted?
# Has 3 different values: Required, Enabled or Disabled. Enabled behavior
# depends on the other side's requirements. If both sides are set to Enabled,
# the connection is encrypted when possible. Note that Wirecrypt should be set 
# to Enabled when running a Firebird server with legacy authentication.
#
# Attention: default depends upon connection type: incoming (server)
#            or outgoing (client).
#
# Per-connection configurable.
#
# Type: string (predefined values)
#
#WireCrypt = Enabled (for client) / Required (for server)

#
# Should connection over the wire be compressed?
# Client only value - server should follow client setting if connect using
# correct protocol (>=13).
#
# Per-connection configurable.
#
# Type: boolean
#
#WireCompression = false

#
# Seconds to wait on a silent client connection before the server sends
# dummy packets to request acknowledgment.
#
# NOTE. This option may hang or crash Windows NT4 or Windows 2000 pre SP3 
# on the client side as explained here: 
# http://support.microsoft.com/default.aspx?kbid=296265.
# or may not prevent eventual inactive client disconnection for other OS.
#
# Normally, Firebird uses SO_KEEPALIVE socket option to keep track of
# active connections. If you do not like default 2-hour keepalive timeout
# then adjust your server OS settings appropriately. On UNIX-like OS's,
# modify contents of /proc/sys/net/ipv4/tcp_keepalive_*. On Windows,
# follow instrutions of this article:
# http://support.microsoft.com/default.aspx?kbid=140325
#
# Per-connection configurable.
#
# Type: integer
#
#DummyPacketInterval = 0


# ----------------------------
# TCP Protocol Settings
#
# The TCP Service name/Port number to be used for client database
# connections.
#
# It is only necessary to change one of the entries, not both.  The
# order of precendence is the 'RemoteServiceName' (if an entry is
# found in the 'services.' file) then the 'RemoteServicePort'.
#
# Per-connection configurable.
#
# Type: string, integer
#
#RemoteServiceName = gds_db
#RemoteServicePort = 3050

#
# The TCP Port Number to be used for server Event Notification
# messages.  The value of 0 (Zero) means that the server will choose
# a port number randomly.
#
# Per-connection configurable.
#
# Type: integer
#
#RemoteAuxPort = 0

#
# TCP/IP buffer size for send and receive buffers of both the client
# and server. The engine reads ahead of the client and can send
# several rows of data in a single packet. The larger the packet size,
# the more data is sent per transfer. Range is 1448 to 32767 (MAX_SSHORT).
#
# Type: integer
#
#TcpRemoteBufferSize = 8192

#
# Either enables or disables Nagle algorithm (TCP_NODELAY option of
# socket) of the socket connection.
#
# Note: Currently is a default for classic and super servers.
#
# Per-connection configurable.
#
# Type: boolean
#
#TcpNoNagle = 1

#
# Either enables or disables the "TCP Loopback Fast Path" feature (SIO_LOOPBACK_FAST_PATH).
# Applies to Windows (version 8/2012 or higher) only.
#
# Type: Boolean, default 1 (true)
#
#TcpLoopbackFastPath = 1

#
# Allows setting of IPV6_V6ONLY socket option. If enabled, IPv6 sockets
# allow only IPv6 communication and separate sockets must be used for
# IPv4 and IPv6. Default is false.
#
# Note: on Windows, the socket option can only be set since Windows Vista,
# older versions have it always enabled.
#
# Type: boolean
#
#IPv6V6Only = 0

#
# Allows incoming connections to be bound to the IP address of a
# specific network card. It enables rejection of incoming connections
# through any other network interface except this one. By default,
# connections from any available network interface are allowed.
# If you are using Classic Server, this setting is for Windows only.
# Under Linux, BSD or Mac OS X, with Classic server use xinetd or launchd
# configuration file (bind parameter).
#
# Type: string
#
#RemoteBindAddress =


# ----------------------------
# Locking and shared memory parameters
#
# Bytes of shared memory allocated for lock manager.
# In Classic mode, the size given is used for the initial allocation. The
# table expands dynamically up to the limit of memory.
#
# Per-database configurable.
#
# Type: integer
#
#LockMemSize = 1M

#
# In Classic, only one client process may access the lock table at any
# time. Access to the lock table is governed by a mutex. The mutex can
# be requested conditionally - a wait is a failure and the request must
# be retried - or unconditionally - the request will wait until it is
# satisfied. This parameter establishes the number of attempts that
# will be made conditionally. Zero value means unconditional mode.
# Relevant only on SMP machines.
#
# Per-database configurable.
#
# Type: integer
#
#LockAcquireSpins = 0

#
# Tune lock hash list; more hash slots mean shorter hash chains. Only
# necessary under very high load. Prime number values are recommended.
#
# Per-database configurable.
#
# Type: integer
#
#LockHashSlots = 8191

# ----------------------------
#
# Bytes of shared memory allocated for event manager.
#
# Per-database configurable.
#
# Type: integer
#
#EventMemSize = 64K


# ===========================
# Engine Settings
# ===========================
#
# ----------------------------
# Which CPUs should be used (Windows Only)
#
# In an SMP system, sets which processors can be used by the server.
# The value is taken from a bit map in which each bit represents a CPU.
# Thus, to use only the first processor, the value is 1. To use both
# CPU 1 and CPU 2, the value is 3. To use CPU 2 and CPU 3, the value
# is 6. The default value is 0 - no affinity will be set.
#
# Type: integer
#
#CpuAffinityMask = 0


# ----------------------------
# Garbage collection policy
#
# Defines how engine does garbage collection. Valid values are :
#	cooperative
#	background
#	combined
#
# Superserver has by default "combined" policy
# Classic has by default "cooperative" policy.
#	Other values are ignored by classic server build
#
# Per-database configurable.
#
# Type: string (special format)
#
#GCPolicy = combined


# ----------------------------
# Security database
#
# Defines locations of security database (one that stores logins and passwords),
# used by server to validate remote connections.
#
# Per-database configurable.
#
# Type: string (pathname)
#
#SecurityDatabase = $(dir_secDb)/security3.fdb


# ==============================
# Settings for Windows platforms
# ==============================
#
# ----------------------------
# Does the guardian restart the server every time it crashes?
#    0 - only start the engine/service once
#    1 - always restart the engine/service if it terminates
#
# Type: integer/boolean
#
#GuardianOption = 1


#
# ----------------------------
# Priority level/class for the server process.
#
# The values are:
#     0 (Zero) - normal priority,
#     positive value - high priority (same as -B command line option)
#     negative value - low priority.
#
# Note: All changes to this value should be carefully tested to ensure
# that engine is more responsive to requests.
#
# Type: integer
#
#ProcessPriorityLevel = 0


# ----------------------------
# Local Connection Settings
#
# The name of the shared memory area used as a transport channel in local protocol.
# Note that the local protocol in v2.0 is not compatible with any previous version
# if Firebird or InterBase.
#
# Please note that the server can register objects in Global\ kernel namespace
# only if it runs under the account with SE_CREATE_GLOBAL_NAME privilege.
# This means that if you run the server under a restricted account under
# Windows Vista/XP SP2/2000 SP4 it will not be accessible using the
# local protocol from other sessions.
#
# Per-connection configurable.
#
# Type: string
#
#IpcName = FIREBIRD

#
# The name of the pipe used as a transport channel in NetBEUI protocol.
# Has the same meaning as a port number for TCP/IP. The default value is
# compatible with IB/FB1.
#
# Per-connection configurable.
#
# Type: string
#
#RemotePipeName = interbas


# ============================
# Settings for Unix/Linux platforms
# ============================

# ----------------------------
# Remove protection against redirecting requests to other servers
#
#     ***WARNING*** ***WARNING*** ***WARNING*** ***WARNING***
#
# Ability to redirect requests to other servers was initially present
# in Interbase, but was broken by Borland in Interbase 6.0, when
# they added SQL dialects. Request redirection was fixed in firebird 2.0,
# but today such behaviour (proxy) seems to be dangerous from security
# point of view. Imagine, you have one carefully protected firebird server,
# access to which is possible from global net. But in case when this server
# has access to your internal LAN (may and should be restricted,
# but often possible), it will work as a gateway for incoming requests like:
# firebird.your.domain.com:internal_server:/private/database.fdb
# It's enough to know name/IP of some internal server on your LAN, and for
# this connection one even need not know login/password on external server.
# Such gateway easily overrides firewall, installed to protect your LAN
# from outside attack.
#
# DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING.
#
# Type: boolean
#
#Redirection = 0


# ============================
# Settings for Architecture Configuration
# ============================

#
# Controls the method Firebird engine uses to work with databases and
# related Firebird server startup parameters.
#
# The values are:
# Super / ThreadedDedicated - databases are opened exclusive by single server process,
#	attachments share single DB pages cache inside process
# SuperClassic / ThreadedShared - databases are opened by single server process,
#	but it does not prevent opening them in other processes (embedded access),
#	each attachment has its own DB pages cache
# Classic / MultiProcess - for each attachment to server a separate process is started,
#	each database may be opened by multiple processes (including local ones for
#	embedded access), each attachment (process) has its own DB pages cache
#
# Type: string
#
#ServerMode = Super