; ; File: ; int2f.asm ; Description: ; multiplex interrupt support code ; ; Copyright (c) 1996, 1998 ; Pasquale J. Villani ; All Rights Reserved ; ; This file is part of DOS-C. ; ; DOS-C is free software; you can redistribute it and/or ; modify it under the terms of the GNU General Public License ; as published by the Free Software Foundation; either version ; 2, or (at your option) any later version. ; ; DOS-C is distributed in the hope that it will be useful, but ; WITHOUT ANY WARRANTY; without even the implied warranty of ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ; the GNU General Public License for more details. ; ; You should have received a copy of the GNU General Public ; License along with DOS-C; see the file COPYING. If not, ; write to the Free Software Foundation, 675 Mass Ave, ; Cambridge, MA 02139, USA. ; ; $Id$ ; %include "segs.inc" %include "stacks.inc" segment HMA_TEXT extern _cu_psp:wrt DGROUP extern _syscall_MUX14:wrt HMA_TEXT global reloc_call_int2f_handler reloc_call_int2f_handler: sti ; Enable interrupts cmp ah,11h ; Network interrupt? jne Int2f3 ; No, continue Int2f1: or al,al ; Installation check? jz FarTabRetn ; yes, just return Int2f2: mov ax,1 ; TE 07/13/01 ; at least for redirected INT21/5F44 ; --> 2f/111e ; the error code is AX=0001 = unknown function stc FarTabRetn: retf 2 ; Return far Int2f3: cmp ah,16h je FarTabRetn ; Win Hook return fast cmp ah,12h je IntDosCal ; Dos Internal calls cmp ah,10h ; SHARE.EXE interrupt? je Int2f1 ; yes, do installation check cmp ah,08h je DriverSysCal ; DRIVER.SYS calls cmp ah,14h ; NLSFUNC.EXE interrupt? jne Int2f?iret ; yes, do installation check Int2f?14: ;; MUX-14 -- NLSFUNC API ;; all functions are passed to syscall_MUX14 push bp ; Preserve BP later on PUSH$ALL call _syscall_MUX14 pop bp ; Discard incoming AX push ax ; Correct stack for POP$ALL POP$ALL mov bp, sp or ax, ax jnz Int2f?14?1 ; must return set carry ;; -6 == -2 (CS), -2 (IP), -2 (flags) ;; current SP = on old_BP and BYTE [bp-6], 0feh ; clear carry as no error condition pop bp iret Int2f?14?1: or BYTE [bp-6], 1 pop bp Int2f?iret: iret ; DRIVER.SYS calls - now only 0803. DriverSysCal: extern _Dyn:wrt DGROUP cmp al, 3 jne Int2f?iret mov di, seg _Dyn mov ds, di mov di, _Dyn+2 jmp short Int2f?iret ;*********************************************************** ; internal doscalls INT2F/11xx - handled through C ;*********************************************************** IntDosCal: ; set up register frame ;struct int2f12regs ;{ ; UWORD es,ds; ; UWORD di,si,bp,bx,dx,cx,ax; ; UWORD ip,cs,flags; ; UWORD callerARG1; ;}; Protect386Registers push ax push cx push dx push bx push bp push si push di push ds push es mov ax,DGROUP mov ds,ax extern _int2F_12_handler:wrt HGROUP call _int2F_12_handler pop es pop ds pop di pop si pop bp pop bx pop dx pop cx pop ax Restore386Registers iret ; Int 2F Multipurpose Remote System Calls ; ; added by James Tabor jimtabor@infohwy.com ; changed by Bart Oldeman ; ; assume ss == ds after setup of stack in entry ; sumtimes return data *ptr is the push stack word ; global _remote_rmdir _remote_rmdir: mov al, 01h jmp short call_int2f global _remote_mkdir _remote_mkdir: mov al, 03h jmp short call_int2f global _remote_chdir _remote_chdir: mov al, 05h jmp short call_int2f global _remote_close _remote_close: mov al, 06h jmp short call_int2f global _remote_commit _remote_commit: mov al, 07h jmp short call_int2f global _remote_read _remote_read: mov al, 08h jmp short call_int2f global _remote_write _remote_write: mov al, 09h jmp short call_int2f global _remote_getfree _remote_getfree: mov al, 0ch jmp short call_int2f global _remote_setfattr _remote_setfattr: mov al, 0eh jmp short call_int2f global _remote_getfattr _remote_getfattr: mov al, 0fh jmp short call_int2f global _remote_rename _remote_rename: mov al, 11h jmp short call_int2f global _remote_delete _remote_delete: mov al, 13h jmp short call_int2f global _remote_open _remote_open: mov al, 16h jmp short call_int2f global _remote_creat _remote_creat: mov al, 17h jmp short call_int2f global _remote_findfirst _remote_findfirst: mov al, 1bh jmp short call_int2f global _remote_findnext _remote_findnext: mov al, 1ch jmp short call_int2f global _remote_close_all _remote_close_all: mov al, 1dh jmp short call_int2f global _remote_doredirect _remote_doredirect: mov al, 1eh jmp short call_int2f global _remote_printset _remote_printset: mov al, 1fh jmp short call_int2f global _remote_flushall _remote_flushall: mov al, 20h jmp short call_int2f global _remote_lseek _remote_lseek: mov al, 21h jmp short call_int2f global _QRemote_Fn _QRemote_Fn mov al, 23h jmp short call_int2f global _remote_printredir _remote_printredir: mov al, 25h jmp short call_int2f global _remote_extopen _remote_extopen: mov al, 2eh call_int2f: mov ah, 11h push bp mov bp,sp push es push si push di push cx push bx cmp al, 0eh je remote_setfattr cmp al, 0fh je remote_getfattr cmp al, 1eh je print_doredir cmp al, 1fh je print_doredir cmp al, 25h je remote_printredir les di, [bp+4] cmp al, 08h je remote_rw cmp al, 09h je remote_rw cmp al, 0ch je remote_getfree cmp al, 21h ; 21h, Lseek from eof je lseekeof cmp al, 23h je qremote_fn int2f_call_push: push word [bp+8] ; very fakey, HaHa ;) int2f_call: xor cx, cx ; set to succeed; clear carry and CX int 2fh pop bx jc no_clear_ax clear_ax: mov ax, cx ; extended open -> status from CX in AX ; otherwise CX was set to zero above jmp short no_neg_ax no_clear_ax: neg ax no_neg_ax: pop bx pop cx pop di pop si pop es pop bp ret lseekeof: mov dx, [bp+8] mov cx, [bp+10] ; "fall through" remote_getfattr: clc ; set to succeed int 2fh jc no_clear_ax jmp short no_neg_ax remote_setfattr: push word [bp+4] jmp short int2f_call print_doredir: push ds mov si,[bp+14] les di,[bp+10] mov dx,[bp+8] mov cx,[bp+6] mov bx,[bp+4] mov ds, [bp+18] push word [bp+16] ; very fakey, HaHa ;) clc ; set to succeed int 2fh pop bx pop ds jc no_clear_ax jmp short clear_ax remote_getfree: clc ; set to succeed int 2fh jc no_clear_ax mov di,[bp+8] mov [di],ax mov [di+2],bx mov [di+4],cx mov [di+6],dx jmp short clear_ax remote_printredir: mov dx, [bp+4] push word [bp+6] jmp short int2f_call remote_rw: jmp short remote_rw1 qremote_fn: push ds lds si,[bp+8] clc int 2fh pop ds mov ax,0xffff jc no_neg_ax jmp short clear_ax remote_rw1: mov cx, [bp+8] clc ; set to succeed int 2fh jc int2f_carry xor ax, ax int2f_carry: neg ax mov di, [bp+10] mov [di], ax mov ax, cx jmp no_neg_ax global _remote_process_end _remote_process_end: ; Terminate process mov ds, [_cu_psp] mov al, 22h call call_int2f push ss pop ds ret %if 0 ; int_2f_111e_call(iregs FAR *iregs) ; ; set up all registers to the int21 entry registers ; call int2f/111e ; copy returned registers into int21 entry registers back ; ; disabled: does not work better than previous implementation global _int_2f_111e_call _int_2f_111e_call: push bp mov bp,sp push si push di push ds lds si, [bp+4] ; ds:si -> iregs mov ax, [si ] mov bx, [si+2] mov cx, [si+4] mov dx, [si+6] push word [si+8] ; si mov di, [si+10] mov bp, [si+12] mov es, [si+16] mov ds, [si+14] pop si push ax mov ax, 111eh int 2fh jc fault pop ax ; restore orig value of ax if no errors push ax fault: pushf push ds push si push bp mov bp,sp lds si,[bp+4+6+10] ; 4=fun, 6=si,di,ds, 10 additional bytes on stack pop word [si+12] ; bp pop word [si+ 8] ; si pop word [si+14] ; ds pop word [si+22] ; flags add sp,2 ; pushed function value mov [si ],ax cmp ax, 5f02h ; 5f02 is special: it manipulates the user stack directly je skip5f02 mov [si+2],bx mov [si+4],cx skip5f02: mov [si+6],dx mov [si+10],di mov [si+16],es pop ds pop di pop si pop bp ret %endif ; ; Test to see if a umb driver has been loaded. ; if so, retrieve largest available block+size ; ; From RB list and Dosemu xms.c. ; ; Call the XMS driver "Request upper memory block" function with: ; AH = 10h ; DX = size of block in paragraphs ; Return: AX = status ; 0001h success ; BX = segment address of UMB ; DX = actual size of block ; 0000h failure ; BL = error code (80h,B0h,B1h) (see #02775) ; DX = largest available block ; ; (Table 02775) ; Values for XMS error code returned in BL: ; 00h successful ; 80h function not implemented ; B0h only a smaller UMB is available ; B1h no UMB's are available ; B2h UMB segment number is invalid ; ; segment INIT_TEXT ; int UMB_get_largest(UCOUNT *seg, UCOUNT *size); global _UMB_get_largest _UMB_get_largest: push bp mov bp,sp sub sp,4 ; for the far call mov ax,4300h ; is there a xms driver installed? int 2fh cmp al,80h jne umbt_error mov ax,4310h int 2fh mov [bp-2],es ; save driver entry point mov [bp-4],bx mov dx,0xffff ; go for broke! mov ax,1000h ; get the umb's call far [bp-4] ; Call the driver ; ; bl = 0xB0 and ax = 0 so do it again. ; cmp bl,0xb0 ; fail safe jne umbt_error and dx,dx ; if it returns a size of zero. je umbt_error mov ax,1000h ; dx set with largest size call far [bp-4] ; Call the driver cmp ax,1 jne umbt_error ; now return the segment ; and the size mov cx,bx ; *seg = segment mov bx, [bp+4] mov [bx],cx mov bx, [bp+6] ; *size = size mov [bx],dx umbt_ret: mov sp,bp pop bp ret ; this was called NEAR!! umbt_error: xor ax,ax jmp umbt_ret ; Log: int2f.asm,v ; Revision 1.4 2000/03/31 05:40:09 jtabor ; Added Eric W. Biederman Patches ; ; Revision 1.3 2000/03/09 06:07:11 kernel ; 2017f updates by James Tabor ; ; Revision 1.2 1999/08/10 17:57:12 jprice ; ror4 2011-02 patch ; ; Revision 1.1.1.1 1999/03/29 15:40:59 jprice ; New version without IPL.SYS ; ; Revision 1.4 1999/02/08 05:55:57 jprice ; Added Pat's 1937 kernel patches ; ; Revision 1.3 1999/02/01 01:48:41 jprice ; Clean up; Now you can use hex numbers in config.sys. added config.sys screen function to change screen mode (28 or 43/50 lines) ; ; Revision 1.2 1999/01/22 04:13:26 jprice ; Formating ; ; Revision 1.1.1.1 1999/01/20 05:51:01 jprice ; Imported sources ; ; ; Rev 1.2 06 Dec 1998 8:48:12 patv ; Bug fixes. ; ; Rev 1.1 29 May 1996 21:03:46 patv ; bug fixes for v0.91a ; ; Rev 1.0 19 Feb 1996 3:34:38 patv ; Initial revision. ; EndLog ;