; ; File: ; entry.asm ; Description: ; System call entry code ; ; Copyright (c) 1998 ; Pasquale J. Villani ; All Rights Reserved ; ; This file is part of DOS-C. ; ; DOS-C is free software; you can redistribute it and/or ; modify it under the terms of the GNU General Public License ; as published by the Free Software Foundation; either version ; 2, or (at your option) any later version. ; ; DOS-C is distributed in the hope that it will be useful, but ; WITHOUT ANY WARRANTY; without even the implied warranty of ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ; the GNU General Public License for more details. ; ; You should have received a copy of the GNU General Public ; License along with DOS-C; see the file COPYING. If not, ; write to the Free Software Foundation, 675 Mass Ave, ; Cambridge, MA 02139, USA. ; ; $Id$ ; %include "segs.inc" %include "stacks.inc" segment HMA_TEXT extern _int21_syscall extern _int21_service extern _int2526_handler extern _error_tos:wrt DGROUP extern _char_api_tos:wrt DGROUP extern _disk_api_tos:wrt DGROUP extern _user_r:wrt DGROUP extern _ErrorMode:wrt DGROUP extern _InDOS:wrt DGROUP extern _cu_psp:wrt DGROUP extern _MachineId:wrt DGROUP extern critical_sp:wrt DGROUP extern int21regs_seg:wrt DGROUP extern int21regs_off:wrt DGROUP extern _Int21AX:wrt DGROUP extern _DGROUP_ global reloc_call_cpm_entry global reloc_call_int20_handler global reloc_call_int21_handler global reloc_call_low_int25_handler global reloc_call_low_int26_handler global reloc_call_int27_handler ; ; MS-DOS CP/M style entry point ; ; VOID FAR ; cpm_entry(iregs UserRegs) ; ; This one is a strange one. The call is to psp:0005h but it returns to the ; function after the call. What we do is convert it to a normal call and ; fudge the stack to look like an int 21h call. ; reloc_call_cpm_entry: ; Stack is: ; return offset ; psp seg ; 000ah ; push bp ; trash old return address mov bp,sp xchg bp,[2+bp] pop bp pushf ; start setting up int 21h stack ; ; now stack is ; return offset ; psp seg ; flags ; push bp mov bp,sp ; set up reference frame ; ; reference frame stack is ; return offset bp + 6 ; psp seg bp + 4 ; flags bp + 2 ; bp <--- bp ; push ax mov ax,[2+bp] ; get the flags xchg ax,[6+bp] ; swap with return address mov [2+bp],ax pop ax ; restore working registers pop bp ; ; Done. Stack is ; flags ; psp seg (alias .COM cs) ; return offset ; cmp cl,024h jbe cpm_error mov ah,cl ; get the call # from cl to ah jmp reloc_call_int21_handler ; do the system call cpm_error: mov al,0 iret ; ; interrupt zero divide handler: ; print a message 'Interrupt divide by zero' ; Terminate the current process ; ; VOID INRPT far ; int20_handler(iregs UserRegs) ; print_hex: mov cl, 12 hex_loop: mov ax, dx shr ax, cl and al, 0fh cmp al, 10 sbb al, 69h das mov bx, 0070h mov ah, 0eh int 10h sub cl, 4 jae hex_loop ret divide_by_zero_message db 0dh,0ah,'Interrupt divide by zero, stack:',0dh,0ah,0 global reloc_call_int0_handler reloc_call_int0_handler: mov si,divide_by_zero_message zero_message_loop: mov al, [cs:si] test al,al je zero_done inc si mov bx, 0070h mov ah, 0eh int 10h jmp short zero_message_loop zero_done: mov bp, sp xor si, si ; print 13 words of stack for debugging LUDIV etc. stack_loop: mov dx, [bp+si] call print_hex mov al, ' ' int 10h inc si inc si cmp si, 13*2 jb stack_loop mov al, 0dh int 10h mov al, 0ah int 10h mov ax,04c7fh ; terminate with errorlevel 127 int 21h sti thats_it: hlt jmp short thats_it ; it might be command.com that nukes invalid_opcode_message db 0dh,0ah,'Invalid Opcode at ',0 global reloc_call_int6_handler reloc_call_int6_handler: mov si,invalid_opcode_message jmp short zero_message_loop ; ; Terminate the current process ; ; VOID INRPT far ; int20_handler(iregs UserRegs) ; reloc_call_int20_handler: mov ah,0 ; terminate through int 21h ; ; MS-DOS system call entry point ; ; VOID INRPT far ; int21_handler(iregs UserRegs) ; reloc_call_int21_handler: ; ; Create the stack frame for C call. This is done to ; preserve machine state and provide a C structure for ; access to registers. ; ; Since this is an interrupt routine, CS, IP and flags were ; pushed onto the stack by the processor, completing the ; stack frame. ; ; NB: stack frame is MS-DOS dependent and not compatible ; with compiler interrupt stack frames. ; sti PUSH$ALL mov bp,sp Protect386Registers ; ; Create kernel reference frame. ; ; NB: At this point, SS != DS and won't be set that way ; until later when which stack to run on is determined. ; int21_reentry: mov dx,[cs:_DGROUP_] mov ds,dx cmp ah,25h je int21_user cmp ah,33h je int21_user cmp ah,35h je int21_user cmp ah,50h je int21_user cmp ah,51h je int21_user cmp ah,62h jne int21_1 int21_user: call dos_crit_sect push ss push bp call _int21_syscall pop cx pop cx jmp short int21_ret ; ; normal entry, use one of our 4 stacks ; ; DX=DGROUP ; CX=STACK ; SI=userSS ; BX=userSP int21_1: mov si,ss ; save user stack, to be retored later ; ; Now DS is set, let's save our stack for rentry (???TE) ; ; I don't know who needs that, but ... (TE) ; mov word [_user_r+2],ss mov word [_user_r],bp ; store and init ; ; Decide which stack to run on. ; ; Unlike previous versions of DOS-C, we need to do this here ; to guarantee the user stack for critical error handling. ; We need to do the int 24h from this stack location. ; ; There are actually four stacks to run on. The first is the ; user stack which is determined by system call number in ; AH. The next is the error stack determined by _ErrorMode. ; Then there's the character stack also determined by system ; call number. Finally, all others run on the disk stack. ; They are evaluated in that order. cmp byte [_ErrorMode],0 je int21_2 int21_onerrorstack: mov cx,_error_tos cli mov ss,dx mov sp,cx sti push si ; user SS:SP push bp call _int21_service jmp short int21_exit_nodec int21_2: inc byte [_InDOS] mov cx,_char_api_tos or ah,ah jz int21_3 cmp ah,0ch jle int21_normalentry int21_3: call dos_crit_sect mov cx,_disk_api_tos int21_normalentry: cli mov ss,dx mov sp,cx sti ; ; Push the far pointer to the register frame for ; int21_syscall and remainder of kernel. ; push si ; user SS:SP push bp call _int21_service int21_exit: dec byte [_InDOS] ; ; Recover registers from system call. Registers and flags ; were modified by the system call. ; int21_exit_nodec: pop bp ; get back user stack pop si %if XCPU >= 386 %ifdef WATCOM sub bp, 4 ; for fs and gs only %else sub bp, 8 ; high parts of eax, ebx, ecx, edx %endif %endif cli mov ss,si mov sp,bp int21_ret: Restore386Registers POP$ALL ; ; ... and return. ; iret ; ; end Dos Critical Section 0 thur 7 ; ; dos_crit_sect: mov [_Int21AX],ax ; needed! push ax ; This must be here!!! mov ah,82h ; re-enrty sake before disk stack int 2ah ; Calling Server Hook! pop ax ret ; ; Terminate the current process ; ; VOID INRPT far ; int27_handler(iregs UserRegs) ; reloc_call_int27_handler: ; ; First convert the memory to paragraphs ; add dx,byte 0fh ; round up rcr dx,1 shr dx,1 shr dx,1 shr dx,1 ; ; ... then use the standard system call ; mov ax,3100h jmp reloc_call_int21_handler ; terminate through int 21h ; ; reloc_call_low_int26_handler: sti pushf push ax mov ax,026h jmp short int2526 reloc_call_low_int25_handler: sti pushf push ax mov ax,025h int2526: push cx push dx push bx push sp push bp push si push di push ds push es mov cx, sp ; save stack frame mov dx, ss cld mov bx, [cs:_DGROUP_] mov ds, bx ; setup our local stack cli mov ss,bx mov sp,_disk_api_tos sti Protect386Registers push dx push cx ; save user stack push dx ; SS:SP -> user stack push cx push ax ; was set on entry = 25,26 call _int2526_handler add sp, byte 6 pop cx pop dx ; restore user stack Restore386Registers ; restore foreground stack here cli mov ss, dx mov sp, cx pop es pop ds pop di pop si pop bp pop bx ; pop off sp value pop bx pop dx pop cx pop ax popf retf ; Bug-compatiblity with MS-DOS. ; This function is supposed to leave the original ; flag image on the stack. CONTINUE equ 00h RETRY equ 01h ABORT equ 02h FAIL equ 03h OK_IGNORE equ 20h OK_RETRY equ 10h OK_FAIL equ 08h PSP_PARENT equ 16h PSP_USERSP equ 2eh PSP_USERSS equ 30h ; ; COUNT ; CriticalError(COUNT nFlag, COUNT nDrive, COUNT nError, struct dhdr FAR *lpDevice); ; global _CriticalError _CriticalError: ; ; Skip critical error routine if handler is active ; cmp byte [_ErrorMode],0 je CritErr05 ; Jump if equal mov ax,FAIL retn ; ; Do local error processing ; CritErr05: ; ; C Entry ; push bp mov bp,sp push si push di ; ; Get parameters ; mov ah,byte [bp+4] ; nFlags mov al,byte [bp+6] ; nDrive mov di,word [bp+8] ; nError ; ; make bp:si point to dev header ; mov si,word [bp+10] ; lpDevice Offset mov bp,word [bp+12] ; lpDevice segment ; ; Now save real ss:sp and retry info in internal stack ; cli mov es,[_cu_psp] push word [es:PSP_USERSS] push word [es:PSP_USERSP] push word [_MachineId] push word [int21regs_seg] push word [int21regs_off] push word [_user_r+2] push word [_user_r] mov [critical_sp],sp ; ; do some clean up because user may never return ; inc byte [_ErrorMode] dec byte [_InDOS] ; ; switch to user's stack ; mov ss,[es:PSP_USERSS] mov sp,[es:PSP_USERSP] ; ; and call critical error handler ; int 24h ; DOS Critical error handler ; ; recover context ; cld cli mov bp, [cs:_DGROUP_] mov ds,bp mov ss,bp mov sp,[critical_sp] pop word [_user_r] pop word [_user_r+2] pop word [int21regs_off] pop word [int21regs_seg] pop word [_MachineId] mov es,[_cu_psp] pop word [es:PSP_USERSP] pop word [es:PSP_USERSS] mov bp, sp mov ah, byte [bp+4+4] ; restore old AH from nFlags sti ; Enable interrupts ; ; clear flags ; mov byte [_ErrorMode],0 inc byte [_InDOS] ; ; Check for ignore and force fail if not ok cmp al,CONTINUE jne CritErr10 ; not ignore, keep testing test ah,OK_IGNORE jnz CritErr10 mov al,FAIL ; ; Check for retry and force fail if not ok ; CritErr10: cmp al,RETRY jne CritErr20 ; not retry, keep testing test ah,OK_RETRY jnz CritErr20 mov al,FAIL ; ; You know the drill, but now it's different. ; check for fail and force abort if not ok ; CritErr20: cmp al,FAIL jne CritErr30 ; not fail, do exit processing test ah,OK_FAIL jnz CritErr30 mov al,ABORT ; ; OK, if it's abort we do extra processing. Otherwise just ; exit. ; CritErr30: cmp al,ABORT je CritErrAbort ; process abort CritErrExit: xor ah,ah ; clear out top for return pop di pop si pop bp ret ; ; Abort processing. ; CritErrAbort: mov ax,[_cu_psp] mov es,ax cmp ax,[es:PSP_PARENT] mov al,FAIL jz CritErrExit cli mov bp,word [_user_r+2] ;Get frame mov ss,bp mov bp,word [_user_r] mov sp,bp mov byte [_ErrorMode],1 ; flag abort mov ax,4C00h mov [bp+reg_ax],ax sti jmp int21_reentry ; restart the system call