OS_Develop/dos_compilers
OS_Develop/dos_compilers
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f3e4294c3f
dos_compilers/Logitech Modula-2 v34/READ.ME

521 lines
17 KiB
Plaintext
Raw Normal View History

Logitech Modula-2 v3.4
2024-07-02 16:25:31 +02:00
Logitech Modula-2 Release 3.40 March, 1990
----------------------------------------------------------------------------
Logitech Modula-2 Release 3.40 READ.ME
======================================
This READ.ME file includes the installation instructions for Release
3.40; a list of the major changes between Release 3.40 and Release 3.03,
and additional new information about Release 3.40. It covers the Compiler
Pack, Toolkit, and the Development System. If you have purchased only
the Compiler Pack, you can ignore the references to the other packages
you did not purchase.
Installation of Logitech Modula-2 Release 3.40
==============================================
Logitech Modula-2 Release 3.40 requires a hard disk for installation.
The Compiler Pack requires approximately 2.4 megabytes of hard disk space
and the Toolkit requires approximately 1.7 megabytes. The Development
System consists of both the Compiler Pack and the Toolkit, so it's space
requirement is approximately 4.1 megabytes.
Both the Compiler Pack and the Toolkit are installed in a subdirectory
structure starting from a single subdirectory. The AUTOEXEC.BAT and
CONFIG.SYS files will be modified for the proper setup of the Modula-2
system.
The Compiler Pack and Toolkit installation disks contain special compressed
archives of the Logitech Modula-2 system. In order to properly install
Modula-2 Release 3.40, you must follow these instructions.
NOTE: The installation instructions presented here take precedence
over the installation instructions in the User's Manual and the
Toolkit Manual.
There are two installation methods provided for installing Logitech
Modula-2 Release 3.40: automatic and manual. The automatic installation
will prompt you for necessary information, and will automatically
update your AUTOEXEC.BAT and CONFIG.SYS files, if necessary. After it
completes the extraction of the files from the installation disks, the
installation of Modula-2 Release 3.40 will be complete. The manual
installation will require you to manually edit your CONFIG.SYS and
AUTOEXEC.BAT files, and use a batch file to extract the files from
the installation disks. Instructions for both methods follow.
NOTE: If you are replacing an earlier release of Logitech Modula-2 with
Release 3.40, you should remove all files and environment settings of the
previous release before installing the new release.
A. Automatic Installation
----------------------
1. To use the automatic installation, insert disk #1 of
the Compiler Pack or Toolkit in your diskette drive
and execute the provided INSTALL program. For example,
if you are installing the Compiler Pack or Development
System from drive A, you would insert the first Compiler
Pack disk in drive A and enter this command at the DOS
prompt:
A:INSTALL
If you are installing the Toolkit alone (if purchased
separately from the Development System), you would
perform the same step with the first Toolkit disk.
2. The install program will provide you with a series of
screens and prompts. An initial screen is displayed
that explains what the installation program is going
to do. After the help information is displayed,
press [Enter] to continue with the installation at
this prompt:
Continue with installation (YES/no) ?
If you do not want to continue, type
N [Enter]
3. You are then prompted to choose the particular Modula-2
3.40 package you wish to install. Enter number corresponding
to the package you are installing:
[1] Compiler Pack
[2] Toolkit
[3] Development System
[4] Quit installation
Choice?
(Note: If you wish to terminate the installation at this
point, select choice 4, "Quit installation".)
4. You will then be prompted for the source drive containing
the installation disk. Enter the drive letter at this
prompt:
Enter the letter of the diskette drive containing
the Logitech Modula-2 installation diskette
(default is A)
>
Press [Enter] to select the default drive A or type the
drive letter.
5. You will then be prompted for the directory where Logitech
Modula-2 will be installed. Enter the drive and path where
you want to install the Modula-2 system files:
Enter the full drive and path of the directory
where you want Logitech Modula-2 installed
(default is C:\M2)
>
Press [Enter] to accept the default C:\M2 or enter the drive
and directory. INSTALL will copy the Modula-2 system files
to this drive and directory.
6. You will then be prompted for the full pathname of your DOS
AUTOEXEC.BAT file. Enter the drive and path of your AUTOEXEC.BAT
file at this prompt:
Enter the full pathname of your DOS AUTOEXEC.BAT
file (default is C:\AUTOEXEC.BAT)
>
Press [Enter] to accept the default C:\AUTOEXEC.BAT or enter
the full pathname of the AUTOEXEC.BAT file.
7. You will then be prompted for the full pathname of your DOS
CONFIG.SYS file. Enter the drive and path of your CONFIG.SYS
file at this prompt:
Enter the full pathname of your DOS CONFIG.SYS file
(default is C:\CONFIG.SYS)
>
Press [Enter] to accept the default C:\CONFIG.SYS or enter
the full pathname of the CONFIG.SYS file.
8. The INSTALL program will then display the choices or entries
you have made. You can confirm these entries at this prompt:
Are these values correct (YES/no) ?
Press [Enter] to begin the installation of Logitech Modula-2
Release 3.40 on your system. If you enter no at this prompt,
install will restart at step 4 above.
Note: If the installation program determines that there
is inadequate disk space to install Modula-2 Release 3.40,
a warning is displayed. If this message is displayed,
press [Enter] to terminate the installation program.
9. As the AUTOEXEC.BAT and CONFIG.SYS files are updated,
INSTALL displays the installation's progress on the
screen. Backups of these files are saved before they
are modified (each with a .BAK extension).
INSTALL changes these files by
- adding the necessary directories to the PATH
statement
- adding necessary new environment settings for
the Modula-2 system (M2OBJ, M2MAK, etc.)
- ensuring that the environment space available
is at least 768 bytes
- ensuring that there are at least 20 file handles
available
10. You will then be prompted to insert the first disk. Press
[Enter] once the disk is inserted. INSTALL will then copy
the Modula-2 files from the installation disk to your
Logitech Modula-2 directory.
11. After the files from the first disk are copied, you will
then be prompted to insert the next disk. Perform step 10
above until all disks have been installed. After all of
the files have been copied, you will be returned to the
DOS prompt.
12. If you are currently using Microsoft C 5.1 and plan on
mixing Modula-2 code with C, add the following line to
the end of your AUTOEXEC.BAT file:
SET INCLUDE=%INCLUDE%;C:\M2\M2LIB\LIB
Note: replace "C:\M2" with the base installation directory
specified in step 5 above.
You should also read the README.DOC files in the EXAMPLES\C-MOD
and EXAMPLES\MOD-C subdirectories for details about mixing
Modula-2 and C code.
13. Reboot your system to activate the changes made to the
CONFIG.SYS and AUTOEXEC.BAT files.
B. Manual Installation
-------------------
1. You must begin by creating the Modula-2 directory on your
hard disk. For example, if you want to install Modula-2
in C:\M2, you would enter the following commands at the
DOS prompt:
C:
MD \M2
2. Next, you must change to the new M2 directory. Do this by
entering the following command:
CD \M2
3. You must then extract the files that form Logitech Modula-2
Release 3.40. If you wish to install either the Compiler Pack
or the Development System, insert the first Compiler Pack disk
in drive A. If you are installing only the Toolkit, insert the
Toolkit in drive A.
4. After the disk has been inserted, enter the following command:
A:M2UNPACK A:
The Modula-2 Release 3.40 files are extracted and copied to
the current directory, C:\M2. The argument "A:", which follows
M2UNPACK, specifies the drive containing the installation disk.
5. After the files from the first disk are copied, you will
then be prompted to insert the next disk. Insert each disk
until all the disks have been installed.
6. The Development System consists of both the Compiler Pack and
the Toolkit. If you are installing the Development System, you
should install the Toolkit after the Compiler Pack has been
installed. Insert the Toolkit disk in drive A, and perform
steps 4 and 5 until it has been installed.
7. You must now modify your DOS CONFIG.SYS file by adding and/or
modifying the "SHELL=" and "FILES=" statements.
The FILES= statement must be at least 20. Ensure that your
CONFIG.SYS contains the statement
FILES=20
The SHELL statement must be specified to increase the default
space available for environment strings. If you are using
DOS 3.1, add the line
SHELL=COMMAND.COM /P /E:48
to your CONFIG.SYS. If you are using DOS 3.2 or above, add
the line
SHELL=COMMAND.COM /P /E:768
to your CONFIG.SYS.
8. You must then modify your DOS AUTOEXEC.BAT file to include
necessary settings required by Modula-2 Release 3.40. The
settings here assume that Release 3.40 was installed in the
C:\M2 directory.
Modify the PATH statement to include the following
directories:
C:\M2\M2EXE;C:\M2\POINT
For example, if your PATH statement looked like this before
the modification:
SET PATH=C:\;C:\DOS;D:\BIN
it would look like this after the modification:
SET PATH=C:\M2\M2EXE;C:\M2\POINT;C:\;C:\DOS;D:\BIN
You must also append the following settings to the end of
your AUTOEXEC.BAT file:
SET M2SYM=C:\M2\M2LIB\SYM
SET M2LIB=C:\M2\M2LIB\LIB
SET M2OBJ=C:\M2\M2LIB\OBJ
SET M2REF=C:\M2\M2LIB\REF
SET M2DEF=C:\M2\M2LIB\DEF
SET M2MOD=C:\M2\M2LIB\MOD
SET M2MAP=C:\M2\M2LIB\MAP
SET M2TMP=C:\M2\M2TMP
SET M2OVL=C:\M2\M2EXE
SET M2MAK=C:\M2\M2EXE
SET M2LBR=C:\M2\M2EXE
(Note: if your system includes a RAM disk, you should set
the M2TMP variable to that drive).
9. If you are currently using Microsoft C 5.1 and plan on mixing
Modula-2 code with C, add the following line to the end of your
AUTOEXEC.BAT file:
SET INCLUDE=%INCLUDE%;C:\M2\M2LIB\LIB
You should also read the README.DOC files in the EXAMPLES\C-MOD
and EXAMPLES\MOD-C subdirectories for details about mixing
Modula-2 and C code.
10. After all of the necessary modifications have been made, reboot
your system to activate the changes.
Major Differences Between Release 3.40 and Release 3.03
=======================================================
Many enhancements have been made to the Logitech Modula-2 Development
System since Release 3.03. Some of these include:
- an enhanced compiler that provides 21-28% faster compilation,
and improved mixed-language support
- improved M2Make operation, including automatic support for the
generation of overlays
- enhanced debuggers, including new breakpoint and assembly windows,
and many new commands
- improved utilities, including greater speed of operation and
enhanced user interfaces
- a vastly improved POINT Editor, providing an improved user interface,
complete keyboard control, and better use of memory
- an improved M2L linker that provides complete support for the
Microsoft languages and mixed-language programming, and 10-20%
faster operation
Details of the enhancements and changes are provided in .DOC files for
each of the major programs. It is important to note as well that the
Cross-Reference function of M2Make has replaced the M2XRef utility in
the package; and the Formatter is no longer included. (All references
to these utilities in the Toolkit manual should be ignored.)
Here is a list of the .DOC files that contain the additional documentation
information about the differences between Release 3.03 and Release 3.40.
These files can be found in the M2DOC directory of the main Modula-2
installation directory.
CHANGES.DOC - general changes and information about
the compiler, linker, utilities, and
libraries
DEBUGGER.DOC - new information about the debuggers
POINT.DOC - new information about the POINT Editor
New Example Files
-----------------
Several new example files are provided with Release 3.40. These files
are in subdirectories of the EXAMPLES directory of the main Modula-2
installation directory. The examples included are mixed-langauge
programming with Microsoft C, an example of coroutines, the use of
the ANSI.SYS screen interface, and operations with files. Here is
a list of the example directories provided:
COROU - example of how to use coroutines
DIGCLOCK - digital clock using ANSI.SYS
FILEIO - example of performing basic file I/O
C-MOD - example of a C program that calls Logitech
Modula-2 procedures
MOD-C - example of a Logitech Modula-2 program
that calls C functions
Each directory contains a batch file, MAKE.BAT, that will compile,
link, and execute the example program. In addition, the mixed-language
examples contain README.DOC files giving additional information on how
to mix C with Modula-2.
Diskette Archive Contents
=========================
What follows is are lists of the contents of the archived files on
the distribution disks. Instructions for selectively extracting
different files from the archives follow these lists.
Compiler Pack
-------------
Disk #1: contents of M2340CP1.EXE
READ.ME
M2DOC\*.*
M2EXE\M2C.EXE
M2EXE\M2COMP.EXE
M2EXE\M2OVL3.OVL
M2EXE\M2OVL4.OVL
M2EXE\M2OVLINI.OVL
M2EXE\M2OVLLIS.OVL
M2EXE\M2OVLSYM.OVL
Disk #2: contents of M2340CP2.EXE
M2EXE\M2OVL1.OVL
M2EXE\PMD.EXE
M2EXE\DB.CFG
M2EXE\DB.HLP
M2EXE\DB.LBR
M2EXE\MDA.CFG
M2EXE\CGA.CFG
M2EXE\EGA.CFG
M2EXE\PTDEMO.MOD
POINT\*.*
EXAMPLES\C-MOD\*.*
EXAMPLES\MOD-C\*.*
EXAMPLES\FILEIO\*.*
Disk #3: contents of M2340CP3.EXE
M2LIB\DEF\*.*
M2LIB\SYM\*.*
M2LIB\LIB\*.*
M2LIB\OBJ\*.*
M2LIB\REF\RTSMAIN.REF
EXAMPLES\COROU\*.*
EXAMPLES\DIGCLOCK\*.*
Toolkit
-------
Disk #1: contents of M2340TK1.EXE
READ.ME
M2DOC\*.*
M2EXE\M2L.EXE
M2EXE\M2MAKE.EXE
M2EXE\LIBRARY.MAK
M2EXE\M2VERS.EXE
M2EXE\RTD.EXE
M2EXE\RTDINIT.OVL
M2EXE\RTDM2.OVL
M2EXE\RTDOVLAY.OVL
M2EXE\DB.CFG
M2EXE\DB.HLP
M2EXE\DB.LBR
M2EXE\MDA.CFG
M2EXE\CGA.CFG
M2EXE\EGA.CFG
Disk #2: contents of M2340TK2.EXE
M2EXE\M2CHECK.EXE
M2EXE\M2DECODE.EXE
M2LIB\ASM\*.*
M2LIB\MOD\*.*
M2LIB\REF\*.*
M2LIB\RTS\*.*
To selectively install files from these disks, perform the following
two steps:
1. Change to your Modula-2 3.40 base directory. If you
want to extract the files into a directory structure
starting at C:\M2, change to your C:\M2 directory.
For example:
C:
CD \M2
2. Execute the archive program that contains the files
you wish to extract, specifying the arguments "-d -o"
followed by the file specification(s) of the file(s)
you want to extract. For example, to extract all of
the M2LIB\MOD files from the Toolkit, you would insert
Toolkit Disk #2 in drive A, and enter the following
command:
A:M2340TK2 -d -o M2LIB\MOD\*.*
The directory structure contained in the archive will
automatically be created if it does not already exist.
----------------------------------------------------------------------
Copyright (C) 1989 Logitech, Inc.
Copyright (C) 1990 MultiScope, Inc. All Rights Reserved.
Reference in New Issue Copy Permalink