80 lines
2.6 KiB
Plaintext
80 lines
2.6 KiB
Plaintext
DEFINITION MODULE RS232Int;
|
||
(*
|
||
Interrupt-driven input/output via the serial port
|
||
|
||
|
||
Derived from the Lilith Modula-2 system developed by the
|
||
group of Prof. N. Wirth at ETH Zurich, Switzerland.
|
||
|
||
|
||
Interrupts are treated with the standard procedure IOTRANSFER.
|
||
Received characters are stored in a buffer of 100H characters.
|
||
The module initializes the serial port as follows:
|
||
baudRate = 1200, stopBits = 1,
|
||
parityBit = FALSE, evenParity = don't care,
|
||
nbrOfBits = 8
|
||
*)
|
||
|
||
|
||
EXPORT QUALIFIED Init, StartReading, StopReading,
|
||
BusyRead, Read, Write;
|
||
|
||
|
||
PROCEDURE Init (baudRate: CARDINAL; stopBits: CARDINAL;
|
||
parityBit: BOOLEAN; evenParity: BOOLEAN;
|
||
nbrOfBits: CARDINAL; VAR result: BOOLEAN);
|
||
(*- Initialize the serial port.
|
||
in: baudRate transmission speed,
|
||
stopBits number of stop bits (usually 1 or 2),
|
||
parityBit if TRUE, parity is used, otherwise not,
|
||
evenParity if parity is used, this indicates even/odd,
|
||
nbrOfBits number of data bits (usually 7 or 8),
|
||
out: result TRUE if the initialization was completed.
|
||
|
||
The legal values for the parameters depend on the implementation
|
||
(e.g. the range of supported baud rates).
|
||
*)
|
||
|
||
PROCEDURE StartReading;
|
||
(*- Allow characters to be received from the serial port.
|
||
|
||
This procedure initializes the communication controller to
|
||
generate interrupts upon reception of a character. It also
|
||
un-masks the corresponding interrupt level in the interrupt
|
||
controller.
|
||
*)
|
||
|
||
PROCEDURE StopReading;
|
||
(*- Disable receiving from the serial port.
|
||
|
||
A call to this procedure disables the communication controller
|
||
from generating interrupts. In addition it terminates the
|
||
coroutine which listens to the line. The old interrupt vector
|
||
as well as the old state of the interrupt controller (mask)
|
||
is restored.
|
||
*)
|
||
|
||
PROCEDURE BusyRead (VAR ch: CHAR; VAR received: BOOLEAN);
|
||
(*- Read a character from serial port, if one has been received.
|
||
out: ch the character received, if any,
|
||
received TRUE if a character was received.
|
||
|
||
If no character has been received, ch = 0C, received = FALSE.
|
||
*)
|
||
|
||
PROCEDURE Read (VAR ch: CHAR);
|
||
(*- Read a character from the serial port.
|
||
out: ch the character received.
|
||
|
||
As opposed to BusyRead, Read waits for a character to arrive.
|
||
*)
|
||
|
||
PROCEDURE Write (ch: CHAR);
|
||
(*- Write a character to the serial port.
|
||
in: ch character to send.
|
||
|
||
Note: no interpretation of characters is made.
|
||
*)
|
||
|
||
END RS232Int.
|
||
|